43 0

Microstructural evolution of twin-roll-cast Al-Mn alloy during cold rolling and subsequent annealing: Effect of number of cold-rolling passes

Title
Microstructural evolution of twin-roll-cast Al-Mn alloy during cold rolling and subsequent annealing: Effect of number of cold-rolling passes
Author
윤종헌
Keywords
Al alloy; Twin-roll casting; Cold rolling; Microstructure; Recrystallization
Issue Date
2019-08
Publisher
ELSEVIER SCIENCE SA
Citation
JOURNAL OF ALLOYS AND COMPOUNDS, v. 797, Page. 504-513
Abstract
Variations in the shape and microstructure of a 3003 Al alloy strip fabricated by twin-roll casting during cold rolling and subsequent annealing are investigated as a function of the number of cold-rolling passes under the same total rolling reduction. With an increase in the number of cold-rolling passes, the length and width of the cold-rolled sheet increases and decreases, respectively, owing to a reduction in the ratio of the deformation zone length to the mean deformation-zone thickness. A homogenized twin-roll-cast strip has much coarser grains and more particles in the surface region than in the center region. The shape, amount, and distribution of the particles remain unchanged after cold rolling and subsequent annealing, and they are independent of the number of cold-rolling passes. However, as the number of cold-rolling passes increases, the amount of plastic deformation accumulated in the surface region of the cold-rolled sheet increases. As a result, the size of recrystallized grains in the surface region of the subsequently annealed sheet gradually decreases with increasing number of cold-rolling passes owing to the enhanced recrystallization behavior. Therefore, the grain size difference between the surface region and the center region of the annealed sheet reduces significantly, and the homogeneity of the microstructure in the thickness direction of the sheet improves with an increase in the number of cold-rolling passes. (C) 2019 Elsevier B.V. All rights reserved.
URI
https://www.sciencedirect.com/science/article/pii/S0925838819317037https://repository.hanyang.ac.kr/handle/20.500.11754/117824
ISSN
0925-8388; 1873-4669
DOI
10.1016/j.jallcom.2019.05.045
Appears in Collections:
COLLEGE OF ENGINEERING SCIENCES[E](공학대학) > MECHANICAL ENGINEERING(기계공학과) > Articles
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML


qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE