Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 노삼영 | - |
dc.date.accessioned | 2019-05-07T05:14:26Z | - |
dc.date.available | 2019-05-07T05:14:26Z | - |
dc.date.issued | 2017-07 | - |
dc.identifier.citation | 대한건축학회논문집 - 구조계, v. 33, No. 7, Page. 13-23 | en_US |
dc.identifier.issn | 1226-9107 | - |
dc.identifier.uri | http://www.dbpia.co.kr/Journal/ArticleDetail/NODE07208019 | - |
dc.identifier.uri | https://repository.hanyang.ac.kr/handle/20.500.11754/103497 | - |
dc.description.abstract | In this study, a reference plane module of the multi-residential building is proposed for applying open housing method. It makes possible to procure a degree of freedom on the elevation design, especially by introducing the Architectural Precast Concrete(APC) panel. A spatial common bay-width was found by analyzing typical spatial units of Korean multi-residential buildings and modularized by a 3-story unit plane. It consists of two mesonnette units and two plane units. The building was classified into three types based on shear wall types and the number of building stories. For each type column sections and concrete strength were analysed, considering the constructability of an efficient formwork system for construction costs. The connection locations between APC and structure were suggested by the stress analysis under the wind load and lifting load. The APC panel with a thickness of 100mm was designed taking into account the self-weight, wind load and lifting load. | en_US |
dc.language.iso | ko_KR | en_US |
dc.publisher | 대한건축학회 | en_US |
dc.subject | 오픈하우징 공법 | en_US |
dc.subject | 디자인 자유도 | en_US |
dc.subject | 건축용 프리캐스트 콘크리트 | en_US |
dc.subject | 구조모델 | en_US |
dc.subject | 집합부 | en_US |
dc.subject | Open Housing | en_US |
dc.subject | Degree of Freedom on the Design | en_US |
dc.subject | Architectural Precast Concrete | en_US |
dc.subject | Structure Model | en_US |
dc.subject | Connection | en_US |
dc.title | 공동주택 디자인 자유도를 위한 오픈하우징 구조모델 | en_US |
dc.title.alternative | Open Housing Structure Model for the Degree of Freedom on the Design of the Multi-residential Building | en_US |
dc.type | Article | en_US |
dc.relation.no | 7 | - |
dc.relation.volume | 33 | - |
dc.relation.page | 13-23 | - |
dc.relation.journal | 대한건축학회논문집 구조계 | - |
dc.contributor.googleauthor | 노삼영 | - |
dc.contributor.googleauthor | 손영진 | - |
dc.contributor.googleauthor | 임지택 | - |
dc.contributor.googleauthor | 김호준 | - |
dc.contributor.googleauthor | 이주성 | - |
dc.relation.code | 2017018973 | - |
dc.sector.campus | E | - |
dc.sector.daehak | COLLEGE OF ENGINEERING SCIENCES[E] | - |
dc.sector.department | DIVISION OF ARCHITECTURE | - |
dc.identifier.pid | noh | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.