Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 박장현 | - |
dc.date.accessioned | 2019-04-19T02:35:39Z | - |
dc.date.available | 2019-04-19T02:35:39Z | - |
dc.date.issued | 2016-12 | - |
dc.identifier.citation | 한국정밀공학회지, v. 33, NO. 12, Page. 1039-1045 | en_US |
dc.identifier.issn | 1225-9071 | - |
dc.identifier.issn | 2287-8769 | - |
dc.identifier.uri | http://www.dbpia.co.kr/Journal/ArticleDetail/NODE07064149 | - |
dc.identifier.uri | https://repository.hanyang.ac.kr/handle/20.500.11754/102359 | - |
dc.description.abstract | We investigated the protection capability of a plate against high speed projectiles demonstrating collision and penetration behaviors by finite element analysis. The element erosion method was used for penetration analysis, which showed that the speed of the projectile was slightly reduced by the collision with the protection plate. Protection capability was measured by the projectile’s attitude angle change because the damage of our tanks by projectiles was also dependent on the projectile-tank collision angle. When the length of the protection plate was sufficiently long, the projectile was severely deformed and incapacitated. In the case of a small plate, the projectile was deformed only in the collision region. Thus, projection capability was investigated by the change of attitude angle. The effect of collision angle, velocity, and length of the plate on the rotational and vertical velocities of the projectile was investigated. | en_US |
dc.description.sponsorship | 이 논문은 국방과학연구소 생존성 기술 특화센터의 사업으로 지원받아 연구되었음 (계약번호 UD090090GD). | en_US |
dc.language.iso | ko_KR | en_US |
dc.publisher | 한국정밀공학회 | en_US |
dc.subject | 능동방호 | en_US |
dc.subject | 고속 위협체 | en_US |
dc.subject | 판재 충돌 | en_US |
dc.subject | Active protection | en_US |
dc.subject | High speed projectile | en_US |
dc.subject | Plate impact | en_US |
dc.title | 판재를 이용한 초고속 위협체의 방호성능에 대한 해석적 연구 | en_US |
dc.title.alternative | Investigation Into Protection Performance of Projectile Using Flying Plate | en_US |
dc.type | Article | en_US |
dc.relation.no | 12 | - |
dc.relation.volume | 33 | - |
dc.identifier.doi | 10.7736/KSPE.2016.33.12.1039 | - |
dc.relation.page | 1039-1045 | - |
dc.relation.journal | 한국정밀공학회지 | - |
dc.contributor.googleauthor | 최효성 | - |
dc.contributor.googleauthor | 신현호 | - |
dc.contributor.googleauthor | 유요한 | - |
dc.contributor.googleauthor | 박장현 | - |
dc.contributor.googleauthor | 김종봉 | - |
dc.contributor.googleauthor | Choi, Hyoseong | - |
dc.contributor.googleauthor | Shin, Hyunho | - |
dc.contributor.googleauthor | Yoo, Yo-Han | - |
dc.contributor.googleauthor | Park, Jahng Hyon | - |
dc.contributor.googleauthor | Kim, Jong-Bong | - |
dc.relation.code | 2016018853 | - |
dc.sector.campus | S | - |
dc.sector.daehak | COLLEGE OF ENGINEERING[S] | - |
dc.sector.department | DEPARTMENT OF AUTOMOTIVE ENGINEERING | - |
dc.identifier.pid | jpark | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.