TY - JOUR AU - 박두희 DA - 2015/09 PY - 2015 UR - http://www.dbpia.co.kr/Journal/ArticleDetail/NODE06404248?TotalCount=1&Seq=1&q=(%5B%EC%82%AC%EC%A7%88%ED%86%A0%20%EC%A7%80%EB%B0%98%EC%97%90%20%EC%84%A4%EC%B9%98%EB%90%9C%20%EB%B2%84%ED%82%B7%EA%B8%B0%EC%B4%88%20%EB%B0%8F%20%EC%96%95%EC%9D%80%EA%B8%B0%EC%B4%88%EC%9D%98%20%EC%88%98%EC%A7%81%EC%A7%80%EC%A7%80%EB%A0%A5%20%EC%82%B0%EC%A0%95%C2%A7coldb%C2%A72%C2%A751%C2%A73%5D)&searchWord=%EC%A0%84%EC%B2%B4%3D%5E%24%EC%82%AC%EC%A7%88%ED%86%A0%20%EC%A7%80%EB%B0%98%EC%97%90%20%EC%84%A4%EC%B9%98%EB%90%9C%20%EB%B2%84%ED%82%B7%EA%B8%B0%EC%B4%88%20%EB%B0%8F%20%EC%96%95%EC%9D%80%EA%B8%B0%EC%B4%88%EC%9D%98%20%EC%88%98%EC%A7%81%EC%A7%80%EC%A7%80%EB%A0%A5%20%EC%82%B0%EC%A0%95%5E*&searchWordCondition=%EC%9E%90%EB%A3%8C%EC%9C%A0%ED%98%95%3D%5E%24%EC%A0%84%EC%B2%B4%5E*&Multimedia=0&isIdentifyAuthor=0&Collection=0&isFullText=0&specificParam=0&SearchMethod=2&SearchOper=System.Int32%5B%5D&SearchKeyword=System.String%5B%5D&SearchOption=System.Int32%5B%5D&Category=002008&Sort=1&SortType=desc&Page=1&PageSize=20 UR - http://hdl.handle.net/20.500.11754/27727 AB - 사질토 지반에 설치된 버킷기초의 수직지지력은 주면마찰력과 선단지지력의 합으로 산정할 수 있다. 하지만 수직하중 작용 시 나타나는 주면마찰력 감소와 선단지지력 증가의 특징을 정확하게 고려할 수 있는 설계식이 없으며, 실제와 같은 사질토 지반의 비관련흐름 특성이 반영되어야 한다. 본 연구에서는 2차원 축대칭 유한요소해석으로 사질토 지반에 설치된 원형 버킷기초의 수직지지력을 다양한 지반 마찰각과 기초 크기에 대하여 산정하였다. 해석 결과의 극한지지력을 주면마찰력과 선단지지력으로 분리하여 특징을 분석한 후 각각의 설계식을 도출하였다. 버킷기초의 주면마찰력은 선단지지력에 비해 크기가 매우 작고 말뚝 설계식과 차이가 근소하므로 이를 동일하게 사용하였다. 주면마찰력의 영향으로 얕은기초의 지지력보다 증가하는 버킷기초의 선단지지력은기존의 설계식을 수정하여 적용할 수 있도록 해석 결과를 토대로 새로운 형상-깊이계수(・)를 제안하였다. 또한 관련흐름법칙을적용하여 제안된 기존의 얕은기초 형상계수와 깊이계수는 실제 사질토 지반에서의 지지력을 과대예측하므로 비관련흐름 특성을 반영한 형상-깊이계수를 사용하여 지지력을 예측해야 한다. The vertical bearing capacity of a bucket foundation installed in sand can be calculated as sum of the skin friction and end bearing capacity. However, the current design equations are not considering the non-associated flow characteristics of sand and the reduction in the skin friction and increase in the end bearing capacity when the vertical load is applied. In this study, we perform two-dimensional axisymmetric finite element analyses following non-associated flow rule and calculate the vertical bearing capacity of circular bucket foundation of various sizes installed in sand of different friction angles. After calculating the skin friction and end bearing force at the ultimate state, design equations are derived for each. The skin friction of bucket foundation is shown significantly small compared to the end bearing capacity. Considering the difference with the available design equation for piles, it is recommended that the equation for piles is used for the bucket foundation. A new shape-depth factor () for bucket foundation is recommended which also accounts for the increment of the end bearing capacity due to skin friction. Additionally, the shape and depth factor of embedded foundation proposed from the associated flow rule can overestimate the bearing capacity in sand, so it is more adequate to use the shape-depth factor proposed in this study. PB - 한국지반환경공학회 KW - 버킷기초 KW - 수직지지력 KW - 비관련흐름법칙 KW - 깊이계수 KW - 수치해석 KW - Bucket foundation KW - Vertical bearing capacity KW - Non-associated flow rule KW - Depth factor KW - Numerical modeling TI - 사질토 지반에 설치된 버킷기초 및 얕은기초의 수직지지력 산정 TT - Evaluation of Vertical Bearing Capacity for Bucket and Shallow Foundations Installed in Sand IS - 9 VL - 16 DO - 10.14481/jkges.2015.16.9.33 T2 - 한국지반환경공학회 논문집 ER -