TY - JOUR AU - 박진섭 DA - 2015/07 PY - 2015 UR - http://www.ingentaconnect.com/content/asp/jnn/2015/00000015/00000007/art00073 UR - http://hdl.handle.net/20.500.11754/26405 AB - We report the improvement in optical and electrical properties of GaN-based green light-emitting diodes (LEDs) with nano-sized etch pits formed by the surface chemical etching. In order to control the density and sizes of etch pits formed on top surface of green LEDs, H3PO4 solution is used as a etchant with different etching time. When the etching time was increased from 0 min to 20 min, both the etch pit size and density were gradually increased. The improvement of extraction efficiency of LEDs using surface etching method can be attributed to the enlarged escape angle of generated photon by roughened p-GaN surface. The finite-difference time-domain (FDTD) simulation results well agreed with experimentally observed results. Moreover, the LED with etched p-GaN surface for 5 min shows the lowest leakage current value and the further increase of etching time resulting in increase of densities of the large-sized etch pit makes the degradation of electrical properties of LEDs. PB - AMER SCIENTIFIC PUBLISHERS KW - Light-Emitting Diodes (LEDs) KW - Extraction Efficiency KW - Leakage Current KW - Chemical Etching TI - Enhancement of Device Performances in GaN-Based Light-Emitting Diodes Using Nano-Sized Surface Pit IS - 7 VL - 15 DO - 10.1166/jnn.2015.10363 T2 - JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY ER -