| 2018-11 | Compositional evolution of long-period stacking ordered structures in magnesium studied by atom probe tomography | 김진경 |
| 2019-01 | Constituent-specific properties in quenching and partitioning (Q&P) processed steel | 김진경 |
| 2018-09 | Constitutive Modeling of the Stacking Fault Energy-Dependent Deformation Behavior of Fe-Mn-C-(Al) TWIP Steels | 김진경 |
| 2023 | Continuous Gas-Phase Photocatalytic Oxidation and Adsorption of Formaldehyde with Monolith Aerogels | 김진경 |
| 2022-01 | Crack-resistant sigma/FCC interfaces in the Fe40Mn40Co10Cr10 high entropy alloy with the dispersed sigma-phase | 김진경 |
| 2017-12 | Data related to dislocation density-based constitutive modeling of the tensile behavior of lath martensitic press hardening steel | 김진경 |
| 2017-12 | Diffusional-displacive transformation enables formation of long-period stacking order in magnesium | 김진경 |
| 2019-04 | Effect of Prior Austenite Grain Size on Hole Expansion Ratio of Quenching and Partitioning Processed Medium-Mn Steel | 김진경 |
| 2017-06 | The effect of vanadium micro-alloying on the microstructure and the tensile behavior of TWIP steel | 김진경 |
| 2020-12 | Evolution of microstructures and mechanical properties of ultrahigh strength, pure electrodeposited Cu during self-annealing | 김진경 |
| 2020-01 | Focused ion beam-induced displacive phase transformation from austenite to martensite during fabrication of quenched and partitioned steel micro-pillar | 김진경 |
| 2020-01 | Focused ion beam-induced displacive phase transformation from austenite to martensite during fabrication of quenched and partitioned steel micro-pillar | 김진경 |
| 2022-10-18 | Heterogeneous grain size and enhanced hardness by precipitation of the BCC particles in medium entropy Fe-Ni-Cr alloys | 김진경 |
| 2020-04 | Improving the production efficiency of high-titania slag in Ti extraction process: fluxing effect on formation of pseudobrookite | 김진경 |
| 2023-02 | In-situ TEM investigation of deformation mechanisms of twinning-induced plasticity steel | 김진경 |
| 2018-05 | Influence of initial microstructures on intercritical annealing behaviour in a medium Mn steel | 김진경 |
| 2019-11 | Influence of initial microstructures on intercritical annealing behaviour in a medium Mn steel | 김진경 |
| 2020-09 | Influence of Manufacturing Conditions on Inclusion Characteristics and Mechanical Properties of FeCrNiMnCo Alloy | 김진경 |
| 2017-08 | Micro-plasticity of medium Mn austenitic steel: Perfect dislocation plasticity and deformation twinning | 김진경 |
| 2022-01 | Microstructure and tensile properties of chemically heterogeneous steel consisting of martensite and austenite | 김진경 |
| 2017-10 | Microstructures and mechanical properties of Ti and Mo micro-alloyed medium Mn steel | 김진경 |
| 2024-01 | Novel Co-free ferrous multicomponent alloys containing L12 particles with high density and heterogeneous distribution | 김진경 |
| 2017-02 | Observation of dislocations with a Burgers vector containing a ˂c˃ component in martensitic hcp ε Fe-17%Mn | 김진경 |
| 2017-12 | On the deformation twinning mechanisms in twinning-induced plasticity steel | 김진경 |
| 2017-09 | On the plasticity mechanisms of lath martensitic steel | 김진경 |
| 2015-01 | On the room temperature deformation mechanisms of a Mg-Y-Zn alloy with long-period-stacking-ordered structures | 김진경 |
| 2021-01 | An Overview of High Yield Strength Twinning-Induced Plasticity Steels | 김진경 |
| 2023-11 | Partially recrystallized triplex-phase medium Mn steel strengthened by B2 precipitates | 김진경 |
| 2019-09 | Partially-recrystallized ferrite grains and multiple plasticity enhancing mechanisms in a medium Mn steel | 김진경 |
| 2018-01 | Partially-recrystallized, Nb-alloyed TWIP steels with a superior strength-ductility balance | 김진경 |
