2020-12 | Additive manufacturing of titanium-base alloys with equiaxed microstructures using powder blends | 한정호 |
2019-02 | Crucial microstructural feature to determine the impact toughness of intercritically annealed medium-Mn steel with triplex-phase microstructure | 한정호 |
2019-01 | Deformation behavior and tensile properties of an austenitic Fe-24Mn-4Cr-0.5C high-manganese steel: Effect of grain size | 한정호 |
2022-04 | Design of low-Ni martensitic steels with novel cryogenic impact toughness exceeding 190 J | 한정호 |
2021-05 | Effect of cooling rate on microstructure and hardness during solution treatment and aging process of Ti-6Al-4V alloy for aerospace components | 한정호 |
2020-05 | Effect of Intercritical Annealing on Microstructure and Tensile Properties of an Ultrafine-Grained Dual-Phase Low Alloy Steel Containing Titanium | 한정호 |
2019-04 | Effects of cold rolling reduction ratio on microstructures and tensile properties of intercritically annealed medium-Mn steels | 한정호 |
2020-04 | The Effects of Process Temperatures on the Microstructure and Tensile Properties of Warm-Stamped Nb-Bearing Medium-Mn Steel | 한정호 |
2019-05 | Enhancement of hydrogen embrittlement resistance of Fe-Mn-C twinning-induced plasticity steel by partial recrystallization technique | 한정호 |
2021-04 | Enhancement of the tensile properties and impact toughness of a medium-Mn steel through the homogeneous microstrain distribution | 한정호 |
2021-01 | Improved strength of a medium -Mn steel by V addition without sacrificing ductility | 한정호 |
2022-08 | Improving toughness of medium-Mn steels after friction stir welding through grain morphology tuning | 한정호 |
2020-04 | Microstructural and mechanical anisotropy of selective laser melted IN718 superalloy at room and high temperatures using small punch test | 한정호 |
2019-03 | Multi-scale characterization of austenite reversion and martensite recovery in a cold-rolled medium-Mn steel | 한정호 |
2020-05 | The possibility of enhanced hydrogen embrittlement resistance of medium-Mn steels by addition of micro-alloying elements | 한정호 |
2021-01 | Recovering the ductility of medium-Mn steel by restoring the original microstructure | 한정호 |
2019-01 | The unexpected stress-strain response of medium Mn steel after friction stir welding | 한정호 |
2015-02 | 조립후 착자를 고려한 비희토류 스포크형 영구자석 전동기 설계 | 한정호 |
2015-02 | 프리셋 전압이 필요 없는 다중 도메인 Optically Compensated Bend 모드 연구 | 한정호 |