| 2002-09 | Shear strain accommodation during severe plastic deformation of titanium using equal channel angular pressing | 신동혁 |
| 2004-04 | Size and distribution of particles and voids pre-existing in equal channel angular pressed 5083 Al alloy: their effect on cavitation during low-temperature superplastic deformation | 신동혁 |
| 2003-08 | Soheroidization of Low Carbon Steel Processed by Equal Channel Angular Pressing | 신동혁 |
| 2001-05 | Stability of channels at a scalloplike Cu6Sn5 layer in solder interconnections | 신동혁 |
| 2005-05 | Strain Hardenability of Ultrafine grained Low Carbon Steels Processed by ECAP | 신동혁 |
| 2005-03 | Strain path effects on the microstructure evolution and mechanical properties of Zr702 | 신동혁 |
| 2007-06 | A study on diffusion bonding of superplastic Ti-6Al-4V ELI grade | 신동혁 |
| 2020-08 | Study on reducing electrode resistance through surface engineering for lithium ion battery | 신동혁 |
| 2007-03 | Superplastic deformation behavior of ultra-fine-grained 5083 Al alloy using load-relaxation tests | 신동혁 |
| 2017-12 | Synthesis of Zirconium-Titanium oxide mixed layers on Ti substrates by plasma electrolytic oxidation and plasma-enhanced electrophoresis | 신동혁 |
| 2004-03 | Tensile Deformation and Fracture Behavior of a Commercial Al Alloy with Nano-Sized Grains | 신동혁 |
| 2005-01 | Tensile deformation characteristics of a nano-structured 5083 Al alloy | 신동혁 |
| 2004-03 | Tensile Deformation Characteristics of Commercial Mg Alloys Processed by Equal Channel Angular Pressing | 신동혁 |
| 2005-01 | Texture development and Monte-Carlo simulation of microstructure evolution in pure Zr grain-refined by equal channel angular pressing | 신동혁 |
| 2000-11 | Thermal stability and mechanical properties of ultrafine grained low carbon steel | 신동혁 |
| 2001-06 | Thermal Stability of Nanostructured Cr3C2-NiCr Coatings | 신동혁 |
| 2002-12 | Ti-6Al-4V 합금의 ECAP 가공에 따른 미세조직의 변화 | 신동혁 |
| 2008-07 | Transparent Ga-doped zinc oxide-based window heaters fabricated by pulsed laser deposition | 신동혁 |
| 2004-03 | Ultrafine Grained Bulk 5083 Al Alloy Produced by Cryogenic Rolling Process | 신동혁 |
| 2004-09 | Ultrafine grained dual phase steel fabricated by equal channel angular pressing and subsequent intercritical annealing | 신동혁 |
| 2005-06 | Ultrafine grained ferrite-martensite dual phase steels fabricated via equal channel angular pressing: Microstructure and tensile properties | 신동혁 |
| 2002-12 | Ultrafine Grained Low Carbon Steels Fabricated by Equal Channel Angular Pressing: Microstructures and Tensile Properties | 신동혁 |
| 2005-11 | Ultrafine grained steels processed by equal channel angular pressing | 신동혁 |
| 2004-04 | 강소성 가공에 의한 구조재료 초미세립화 | 신동혁 |
| 2010-02 | 금융자동화기기를 위한 플러그인 프레임워크의 설계와 구현 | 신동혁 |
| 2000-09 | 무플럭스 레이저 리플로우 솔더링으로 형성된 Sn-Pb 공정 솔더 범프의 특성 | 신동혁 |
| 2005-11 | 상용 순수 티타늄의 심한 소성가공에 따른 미세조직 발현과 기계적 특성 변화 - 초기 입도 영향 | 신동혁 |
| 2000-06 | 용탕단조를 이용한 SiC 휘스카 강화 마그네슘 복합재료의 제조 | 신동혁 |
| 2000-02 | 철도차량용 6005A 알루미늄 합금 압출재의 미세조직 및 용접부 피로 특성 | 신동혁 |
| 2005-08 | 초미세 결정립 순-Ti의 미세조직 및 상온 인장 물성 | 신동혁 |
