2016-10 | DC characteristics of ALD-grown Al2O3/AlGaN/GaN MIS-HEMTs and HEMTs at 600 °C in air | 소홍윤 |
2017-11 | Degradation of 2DEG transport properties in GaN-capped AlGaN/GaN heterostructures at 600 degrees C in oxidizing and inert environments | 소홍윤 |
2021-06 | Development and optimization of a resonance-based mechanical dynamic absorber structure for multiple frequencies | 소홍윤 |
2021-05 | Development of topological optimization schemes controlling the trajectories of multiple particles in fluid | 소홍윤 |
2017-04 | Dielectric properties of ligand-modified gold nanoparticle/SU-8 photopolymer based nanocomposites | 소홍윤 |
2020-09 | Direct and Continuous Liquid-Level Sensing Using Gallium Nitride Ultraviolet Photodetectors | 소홍윤 |
2020-03 | Dual-surface lens with ring-shaped structures for optical tuning of GaN ultraviolet photodetectors at low temperature | 소홍윤 |
2020-10 | Effect of 3D printing raster angle on reversible thermo-responsive composites using PLA/paper bilayer | 소홍윤 |
2017-06 | Effect of Frost Formation on Operation of GaN Ultraviolet Photodetectors at Low Temperatures | 소홍윤 |
2022-02 | Effect of zirconia nanotube coating on the hydrophilicity and mechanochemical behavior of zirconium for biomedical applications | 소홍윤 |
2022-04 | Electrically, Thermally, and Mechanically Anisotropic Gels with a Wide Operational Temperature Range | 소홍윤 |
2013-10 | Electrothermal modeling, fabrication and analysis of low-power consumption thermal actuator with buckling arm | 소홍윤 |
2017-07 | Enhancement of thermoelectric characteristics in AlGaN/GaN films deposited on inverted pyramidal Si surfaces | 소홍윤 |
2020-04 | Facile Enhancement of Optical Sensitivity in GaN Ultraviolet Photodetectors by Using In-Situ Plano-Convex Polymer Lens | 소홍윤 |
2021-12 | Facile Manufacturing of Capacitive Flow Meters Using Indirect Three-Dimensional Printing Technology for Rectifying Airflows | 소홍윤 |
2020-04 | Facile method for reducing decay time in GaN-based ultraviolet photodetector using microheater | 소홍윤 |
2020-01 | Facile microfabrication of 3-dimensional (3D) hydrophobic polymer surfaces using 3D printing technology | 소홍윤 |
2022-04 | Facile microfabrication of three dimensional-patterned micromixers using additive manufacturing technology | 소홍윤 |
2022-07 | Flexible and cracked polymer membrane for thermal-expansive reversible fuses using three-dimensional groove patterns | 소홍윤 |
2017-12 | Graphene-enhanced gallium nitride ultraviolet photodetectors under 2 MeV proton irradiation | 소홍윤 |
2014-05 | Hierarchical Silicon Nanospikes Membrane for Rapid and High-Throughput Mechanical Cell Lysis | 소홍윤 |
2017-02 | Highly antireflective AlGaN/GaN ultraviolet photodetectors using ZnO nanorod arrays on inverted pyramidal surfaces | 소홍윤 |
2018-05 | Impact of thermally dead volume on phonon conduction along silicon nanoladders | 소홍윤 |
2017-01 | Improved Dielectric Properties of Polyvinylidene Fluoride Nanocomposite Embedded with Poly(vinylpyrrolidone)-Coated Gold Nanoparticles | 소홍윤 |
2016-01 | Interdigitated Pt-GaN Schottky interfaces for high-temperature soot-particulate sensing | 소홍윤 |
2017-03 | Lithography-free microfabrication of AlGaN/GaN 2DEG strain sensors using laser ablation and direct wire bonding | 소홍윤 |
2016-01 | Low-resistance gateless high electron mobility transistors using three-dimensional inverted pyramidal AlGaN/GaN surfaces | 소홍윤 |
2019-10 | Maskless microfabrication of nanowire-decorated porous membrane for rapid purification of contaminated water | 소홍윤 |
2016-09 | A microfabricated sun sensor using GaN-on-sapphire ultraviolet photodetector arrays | 소홍윤 |
2019-03 | Microfabricaton of microfluidic check valves using comb-shaped moving plug for suppression of backflow in microchannel | 소홍윤 |