| 2017-03 | Effect of copper oxide shell thickness on flash light sintering of copper nanoparticle ink | 김학성 |
| 2021-05 | Effect of crystallinity on the mechanical behavior of carbon fiber reinforced polyethylene-terephthalate (CF/PET) composites considering temperature conditions | 김학성 |
| 2022-09 | Effect of cure shrinkage of epoxy molding compound on warpage behavior of semiconductor package | 김학성 |
| 2019-01 | Effect of plasma treatment on adhesion strength and moisture absorption characteristics between epoxy molding compound/silicon chip (EMC/chip) interface | 김학성 |
| 2014-11 | The effect of poly (N-vinylpyrrolidone) molecular weight on flash light sintering of copper nanopaste | 김학성 |
| 2017-07 | Effect of the cooling rate on the mechanical properties of glass fiber reinforced thermoplastic composites | 김학성 |
| 2017-06 | Efficiency enhancement in dye-sensitized solar cells using the shape/size-dependent plasmonic nanocomposite photoanodes incorporating silver nanoplates | 김학성 |
| 2016-05 | Electrical wire explosion process of copper/silver hybrid nano-particle ink and its sintering via flash white light to achieve high electrical conductivity | 김학성 |
| 2022-10 | Empirical Validation of an Auxetic Structured Foot With the Powered Transfemoral Prosthesis | 김학성 |
| 2020-05 | Enhancing intense pulsed light sintering characteristic of Cu nanoparticle/microparticle-ink using ultraviolet surface modification on polyimide substrate | 김학성 |
| 2015-04 | Environmentally benign and facile reduction of graphene oxide by flash light irradiation | 김학성 |
| 2015-11 | Fabrication of iridium oxide nanoparticles supported on activated carbon powder by flashlight irradiation for oxygen evolutions | 김학성 |
| 2018-04 | Facile and cost-effective methodology to fabricate MoS2 counter electrode for efficient dye-sensitized solar cells | 김학성 |
| 2020-07 | Facile synthesis of cobalt-nickel sulfide thin film as a promising counter electrode for triiodide reduction in dye-sensitized solar cells | 김학성 |
| 2017-03 | Finite element analysis of a low-velocity impact test for glass fiber-reinforced polypropylene composites considering mixed-mode interlaminar fracture toughness | 김학성 |
| 2021-06 | Finite element analysis of moisture induced thermo-mechanical delamination of semiconductor packages considering in-situ moisture desorption during reflow process | 김학성 |
| 2015-03 | Flash light sintered copper precursor/nanoparticle pattern with high electrical conductivity and low porosity for printed | 김학성 |
| 2017-04 | Flash light sintering of ag mesh films for printed transparent conducting electrode | 김학성 |
| 2014-01 | Flash light sintering of nickel nanoparticles for printed electronics | 김학성 |
| 2015-01 | Flash Light-Assisted Facile and Eco-Friendly Synthesis of Platinum-Based Alloy Nanoparticle/Carbon Nano-Tube Catalysts for a Direct Methanol Fuel Cell | 김학성 |
| 2020-09 | Fracture envelopes on the 3D-DIC and hybrid inverse methods considering loading history | 김학성 |
| 2017-04 | Growth of a WSe2/W counter electrode by sputtering and selenization annealing for high-efficiency dye-sensitized solar cells | 김학성 |
| 2017-03 | High Performance MoSe2/Mo Counter Electrodes Based-Dye-Sensitized Solar Cells | 김학성 |
| 2014-06 | Highly conductive copper nano/microparticles ink via flash light sintering for printed electronics | 김학성 |
| 2015-04 | A Highly Reliable Copper Nanowire/Nanoparticle Ink Pattern with High Conductivity on Flexible Substrate Prepared via a Flash Light-Sintering Technique | 김학성 |
| 2016-02 | Identification of stiffness distribution of fatigue loaded polymer concrete through vibration measurements | 김학성 |
| 2019-04 | IGZO 반도체 및 구리 전극의 deep-UV/IPL 광어닐링 공정을 통한 TFT 특성 연구 | 김학성 |
| 2017-06 | Improving pedestrian safety via the optimization of composite hood structures for automobiles based on the equivalent static load method | 김학성 |
| 2017-03 | In situ fabrication of copper electrodes on carbon-fiber-reinforced polymer (CFRP) for damage monitoring by printing and flash light sintering | 김학성 |
| 2013-01 | In situ monitoring of a flash light sintering process using silver nano-ink for producing flexible electronics | 김학성 |
