| 2017-08 | Effect of emergency core cooling system flow reduction on channel temperature during recirculation phase of large break loss-of-coolant accident at Wolsong unit 1 | 김성중 |
| 2015-10 | Effect of In-Vessel Retention Strategies under Postulated SGTR Accidents of OPR1000 | 김성중 |
| 2018-08 | Effect of Molten Corium Behavior Uncertainty on the Severe Accident Progress | 김성중 |
| 2015-08 | Effect of oxide layer thickness on the pool boiling critical heat flux of pre-oxidized RPV material | 김성중 |
| 2016-05 | Effect of the Aligned Flow Obstacles on Downward-Facing CHF in an Inclined Rectangular Channel | 김성중 |
| 2017-03 | Effectiveness and adverse effects of in-vessel retention strategies under a postulated SGTR accident of an OPR1000 | 김성중 |
| 2015-05 | Effectiveness and adverse effects of reactor coolant system depressurization strategy with various severe accident management guidance entry conditions for OPR1000 | 김성중 |
| 2015-05 | Effectiveness of Modified Jakob Number as a SAMG Entry Condition | 김성중 |
| 2019-05 | Effects of Air Injection on Condensation-Induced Pressure Shock and Critical Heat Flux of Inclined Downward-Facing Heater | 김성중 |
| 2017-01 | Effects of flow obstacles on pool boiling critical heat flux of a downward-facing metal heater | 김성중 |
| 2016-05 | Effects of flow obstacles on pool boiling critical heat flux of a downward-facing metal heater | 김성중 |
| 2017-06 | Effects of layer-by-layer assembled PEI/MWCNT surfaces on enhanced pool boiling critical heat flux | 김성중 |
| 2015-08 | Effects of various thin film coating techniques on pool boiling heat transfer | 김성중 |
| 2018-08 | Efficacy analysis of hydrogen mitigation measures of CANDU containment under LOCA scenario | 김성중 |
| 2017-01 | Efficacy assessment of independent severe accident mitigation measures in OPR1000 using MELCOR code | 김성중 |
| 2015-01 | Enhanced critical heat flux with single-walled carbon nanotubes bonded on metal surfaces | 김성중 |
| 2016-10 | Enhanced pool boiling critical heat flux induced by capillary wicking effect of a Cr-sputtered superhydrophilic surfaces | 김성중 |
| 2016-11 | Enhanced pool boiling critical heat flux with a FeCrAl layer fabricated by DC sputtering | 김성중 |
| 2019-10 | Evaluating Condenser Performance Based on Pressure Transition Temperature | 김성중 |
| 2013-12 | Experimental evaluation of permanent magnet probe flowmeter measuring high temperature liquid sodium flow in the ITSL | 김성중 |
| 2020-07 | Experimental study of droplet characteristics in dropwise condensation along the axial length of a long vertical tube | 김성중 |
| 2020-10 | Experimental study of reflooding heat transfer on Cr-layered cladding under atmospheric pressure | 김성중 |
| 2019-01 | Experimental study of saturated pool boiling heat transfer with FeCrAl- and Cr-layered vertical tubes under atmospheric pressure | 김성중 |
| 2016-05 | FeCrAl Layer Fabricated by DC Sputtering Enhances Pool Boiling Critical Heat Flux | 김성중 |
| 2019-10 | A flammability limit model for hydrogen-air-diluent mixtures based on heat transfer characteristics in flame propagation | 김성중 |
| 2014-10 | Hydride fuel irradiation in MITR-II: Thermal design and validation results | 김성중 |
| 2019-12 | Identification of Hydrogen Flammability in steam generator compartment of OPR1000 using MELCOR and CFX codes | 김성중 |
| 2019-10 | Implementation of PAR correlations to the MELCOR Code | 김성중 |
| 2020-12 | Improved prediction model for H2/CO combustion risk using a calculated non-adiabatic flame temperature model | 김성중 |
| 2019-10 | Improvements of MARS Code for Analyzing S-CO2 Cycle Coupled to PWR type SMR | 김성중 |
