35 0

A comparison of microstructures and mechanical properties in a Cu-Zr alloy processed using different SPD techniques

Title
A comparison of microstructures and mechanical properties in a Cu-Zr alloy processed using different SPD techniques
Author
Megumi Kawasaki
Keywords
HIGH-PRESSURE TORSION; SEVERE PLASTIC-DEFORMATION; GRAIN-REFINEMENT; ALUMINUM-ALLOY; SUPERPLASTIC DUCTILITIES; EVOLUTION; HOMOGENEITY; ECAP; MG; COPPER
Issue Date
2013-07
Publisher
SPRINGER, 233 SPRING ST, NEW YORK, NY 10013 USA
Citation
JOURNAL OF MATERIALS SCIENCE 권: 48 호: 13 페이지: 4653-4660
Abstract
Experiments were conducted to evaluate the microstructures and mechanical properties of a Cu-0.1 % Zr alloy processed using two different techniques of severe plastic deformation: equal-channel angular pressing (ECAP) and high-pressure torsion (HPT). The samples were processed at room temperature through ECAP for eight passes or through HPT for 10 turns. The results show HPT is more effective both in refining the grains and in producing a large fraction of grain boundaries having high angles of misorientation. Both procedures produce reasonably homogeneous hardness distributions but the average hardness values were higher after HPT. In tensile testing at 673 K, the highest strength and ductility was achieved after processing by HPT. This is attributed to the grain stability and high fraction of high-angle grain boundaries produced in HPT.
Description
European Research Council under ERC
URI
http://dx.doi.org/10.1007/s10853-012-7072-0http://hdl.handle.net/20.500.11754/44182
ISSN
0022-2461
DOI
10.1007/s10853-012-7072-0
Appears in Collections:
COLLEGE OF ENGINEERING[S](공과대학) > MATERIALS SCIENCE AND ENGINEERING(신소재공학부) > Articles
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML


qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE