863 0

Full metadata record

DC FieldValueLanguage
dc.contributor.author문승재-
dc.date.accessioned2017-03-06T01:48:25Z-
dc.date.available2017-03-06T01:48:25Z-
dc.date.issued2015-06-
dc.identifier.citation플랜트학술논문집(KOREAN JOURNAL OF PLANT ENGINEERING), v. 11, NO 2, Page. 30-38en_US
dc.identifier.issn1976-8702-
dc.identifier.urihttp://www.ndsl.kr/ndsl/search/detail/article/articleSearchResultDetail.do?cn=JAKO201510661372392-
dc.identifier.urihttp://hdl.handle.net/20.500.11754/25848-
dc.description.abstract탈기기-저압드럼 일체형 배열회수보일러로 구성된 복합화력발전소에서 발생한 저압증기발생기의 튜브파손 사례를 관찰하였다. 수소이온농도 변화를 관찰한 결과 복수펌프 후단에 주입된 암모니아가 탈기기를 통과한 후 저압 드럼 내에서 암모니아 분배율에 따라 증기와 함께 다량의 암모니아가 소모되어 급수 내 수소이온농도 저하를 확인하였다. 이를 해결하기 위해 저압드럼 내에 암모니아를 직접 주입할 수 있도록 추가 주입위치를 선정하였으며 적정량의 암모니아 용액을 주입함으로써 보일러 급수의 최적 수소이온농도인 9.2~9.6 으로 조절이 가능하다는 결론을 얻었다. This study was conducted on combined cycle power plant consisting of HRSG with integral deaerator type to avoid tube failures of low pressure evaporator tubes. Based on the observation of pH variation at the discharge of boiler feed water pump by continuous pH measurement for a period of time, it was identified that pH of feed water is getting reduced as ammonia is distributed into vapor and liquid depending on the distribution ratio of ammonia in the LP drum after the deaerator. To solve this problem, the counterplan was prepared by reexamination of ammonia injection point and quantity. In conclusion, it was accomplished that 9.2~9.6 is the optimized pH range for boiler feed water by arranging additional piping for ammonia to inject directly to LP drum.en_US
dc.description.sponsorship본 연구는 한국에너지기술평가원“복합발전 플랜트 안전운영을 위한 취약노드 기술 개발”과제의 연구비지원(과제번호 20141010101850)에 의해 수행되었습니다.en_US
dc.language.isoko_KRen_US
dc.publisher사단법인 한국플랜트학회en_US
dc.subject복합화력발전소en_US
dc.subject배열회수보일러en_US
dc.subject탈기기-저압드럼 일체형en_US
dc.subject수소이온농도en_US
dc.subject암모니아 주입설비en_US
dc.subjectHRSGen_US
dc.subjectIntegral Deaerator Typeen_US
dc.title암모니아 추가 주입에 의한 배열회수보일러 급수의 수소이온농도 조절en_US
dc.title.alternativepH Control of Feed Water for HRSG with Additional Injection of NH3en_US
dc.typeArticleen_US
dc.relation.no2-
dc.relation.volume11-
dc.relation.page30-38-
dc.relation.journal플랜트학술논문집(KOREAN JOURNAL OF PLANT ENGINEERING)-
dc.contributor.googleauthor목용강-
dc.contributor.googleauthor문승재-
dc.contributor.googleauthor이재헌-
dc.contributor.googleauthorMok, Yong-kang-
dc.contributor.googleauthorMoon, Seung-Jae-
dc.contributor.googleauthorLee, Jae-Heon-
dc.relation.code2012220554-
dc.sector.campusS-
dc.sector.daehakCOLLEGE OF ENGINEERING[S]-
dc.sector.departmentDIVISION OF MECHANICAL ENGINEERING-
dc.identifier.pidsmoon-
Appears in Collections:
COLLEGE OF ENGINEERING[S](공과대학) > MECHANICAL ENGINEERING(기계공학부) > Articles
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML


qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE