Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 이주 | - |
dc.date.accessioned | 2017-01-09T04:26:26Z | - |
dc.date.available | 2017-01-09T04:26:26Z | - |
dc.date.issued | 2015-05 | - |
dc.identifier.citation | 전기학회논문지, v. 64, NO 5, Page. 824-829 | en_US |
dc.identifier.issn | 1975-8359 | - |
dc.identifier.issn | 2287-4364 | - |
dc.identifier.uri | http://www.dbpia.co.kr/Article/NODE06283371 | - |
dc.identifier.uri | http://hdl.handle.net/20.500.11754/24976 | - |
dc.description.abstract | The rotary type testing machine undergoes mechanical stress as an external force is applied. In case of the rotary type testing machine, even a tiny flaw results in a fatal demage because the size of the machine is huge. Therefore, when designing the rotary type testing machine, it is necessary to secure a safety factor with the mechanical stress analysis in order to prevent the machine from being destroyed due to scattering or transformation of rotating field. This thesis proposes a LSM rotary type tesitng machine which rotates at the speed of up to 600km/h. And the mechanical stress is considered in order that the safety factor remains above 1.5 at the maximum speed. In addition, because normal force as well as thrust occurs in the machine, the normal force exerted was considered through the strength analysis. Finally, a design plan which enables to weaken the normal force affecting the rotary type testing machine is introduced and its validity is proved by the results of FEM analysis. | en_US |
dc.description.sponsorship | 본 논문은 한국철도기술연구원에서 시행하는 주요 사업(레일방식 e고속철도 핵심요소기술 개발, 과제 번호PK1501A)의 일환으로 수행되었습니다. | en_US |
dc.language.iso | ko_KR | en_US |
dc.publisher | 대한전기학회 | en_US |
dc.subject | LSM | en_US |
dc.subject | Rotary Type | en_US |
dc.subject | Testing Machine | en_US |
dc.subject | Rotary Type Testing machine | en_US |
dc.subject | Mechanical Strength | en_US |
dc.title | 기계적 강도를 고려한 e고속 선형동기전동기 회전형 시험기 설계 | en_US |
dc.title.alternative | Design of High-Speed LSM Rotary Type Testing Machine in Consideration of Mechanical Strength | en_US |
dc.type | Article | en_US |
dc.relation.no | 5 | - |
dc.relation.volume | 64 | - |
dc.identifier.doi | 10.5370/KIEE.2015.64.5.824 | - |
dc.relation.page | 824-829 | - |
dc.relation.journal | 전기학회논문지 | - |
dc.contributor.googleauthor | 설현수 | - |
dc.contributor.googleauthor | 박응석 | - |
dc.contributor.googleauthor | 이주 | - |
dc.contributor.googleauthor | 박찬배 | - |
dc.contributor.googleauthor | Seol, Hyun-Soo | - |
dc.contributor.googleauthor | Park, Eung-Seok | - |
dc.contributor.googleauthor | Lee, Ju | - |
dc.contributor.googleauthor | Park, Chan-Bae | - |
dc.relation.code | 2015040797 | - |
dc.sector.campus | S | - |
dc.sector.daehak | COLLEGE OF ENGINEERING[S] | - |
dc.sector.department | DIVISION OF ELECTRICAL AND BIOMEDICAL ENGINEERING | - |
dc.identifier.pid | julee | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.