Preparation and characterization of a new cement-based composite with sulfur polymer

Title
Preparation and characterization of a new cement-based composite with sulfur polymer
Authors
최성철
Keywords
ELEMENTAL SULFUR; SHORT-TERM HYDRATION; ANIONIC COPOLYMERIZATION; MINERAL ADMIXTURES; INERT MATERIALS; MORTARS; CONCRETE; STYRENE; WASTE; DUST
Issue Date
2015-04
Publisher
ROYAL SOC CHEMISTRY
Citation
RSC ADVANCES, v. 5, NO 45, Page. 36030-36035
Abstract
The addition of sulfur polymer (SP) and the resulting effects on the hydration and physical properties of polymer-cement mortars were investigated. Sulfur polymer-cement mortars (SPMs) with 5 wt%, 10 wt%, and 20 wt% of SPs were prepared to evaluate the compressive strength and impermeability in comparison to ordinary Portland cement mortars (PCMs). After curing for 28 days, the compressive strength of SPM with 5 wt% of SP increased by approximately 8.0% compared to PCM by hardened SP binder as well as proper hydration of hydrates. The impermeability of SPMs cured for 28 days was two times higher than that of PCM cured for the same period. The outstanding enhancement of the compressive strength and impermeability are attributed to SP additive formed inside the hydrated cement.
URI
http://pubs.rsc.org/en/Content/ArticleLanding/2015/RA/C5RA02281A#!divAbstracthttp://hdl.handle.net/20.500.11754/23825
ISSN
2046-2069
DOI
http://dx.doi.org/10.1039/c5ra02281a
Appears in Collections:
COLLEGE OF ENGINEERING[S](공과대학) > ETC
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML


qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE