TY - THES AU - 이주식 DA - 2019. 8 PY - 2019 UR - https://repository.hanyang.ac.kr/handle/20.500.11754/109469 UR - http://hanyang.dcollection.net/common/orgView/200000436451 AB - 플랜트 배관공사에서 공장제작(Spool)과 현장(Field)설치 작업의 작업효율(생산성)을 측정하여 계획 생산성과 실제 작업 생산성의 비교를 통해 목표 생산성에 도달할 수 있는 구체적인 방안을 모색하여 효율적인 관리 능력을 향상시킴으로써 원가 경쟁력을 강화할 수 있다. 이를 위하여 단위 원가 당 생산효율을 투입자원(Input)과 결과물(Output)의 비교를 통해 현장작업에서의 저생산성을 생산성이 좋은 공장제작(Spool) 비율로 확대 증가시킬 방안을 만들어 원가 경쟁력을 높일 수 있는 관리 능력을 향상해야 한다. 프로젝트 초기계획을 수립할 때 같은 환경 조건 요인을 적용하여 작업 물량산출에 의한 프로젝트 원가 산정과 자원 투입에 따른 생산성 값을 예측함으로써 보다 정확한 공사원가 산정이 가능하다. 본 연구에서는 생산성의 향상 방안으로 SKID화, MODULE화를 설계단계부터 적용 범위를 결정하여 장비의 일체화, 공급 line에 이용되는 파이프랙(Pipe rack)의 블록화, 배관 제작의 스풀(Spool)화 등을 통한 공장제작 비율 확대를 제시하였다. 아울러 단위 생산량을 근거로 하여 현재 진행중인 프로젝트의 생산성을 비교 검토할 수 있으므로 프로젝트의 위기 관리방안의 기준으로 활용될 수 있을 것이다.; It is possible to enhance the cost competitiveness with improved management capabilities by measuring the work efficiency (productivity) of shop (factory) fabrication and site installation work and exploring specific ways to reach target productivity through the comparison of predictive and action productivity. Improved management ability is required to achieve cost competitiveness through increasing the ratio of productive factory manufacturing (spool fabrication) by comparing the production and the efficiency per unit cost. In establishing the initial project plan, the same factors of impact can be applied to calculate the project cost by work volume and the productivity value by resource input to produce more accurate construction cost. In addition, it is easy to see the extent to which each factor affects productivity by comparing project productivity with expected risks. SKID and MODULE have been determined from the design stage to improve the productivity. The integration of the equipment and the block of the pipe rack wes used for the supply line, the spool of the piping, etc to increase the rate of factory production. The results of the present study can be used as a reference in establishing risk management plan for a project by comparing and reviewing the productivity of an ongoing project with foretasted output. PB - 한양대학교 TI - 플랜트 배관공사의 경쟁력 확보를 위한 생산성 비교 분석 연구 TT - Study on the Comparative Analysis of Productivity to Improve Competitiveness in Plant Piping Construction TA - Ju-sik, Lee ER -