| 2008-05 | A calibration method of mechanical strains from a temperature-compensating FBG sensor | 최낙삼 |
| 2017-09 | Acoustic emission characteristics of methacrylate-based composite and silorane-based composite during dental restoration according to a variety of C-factor | 최낙삼 |
| 2006-03 | Acoustic emission characteristics of single-edge-notched glass fiber/aluminum hybrid laminates | 최낙삼 |
| 2004-08 | Acoustic emission during fracture process of rubber-modified epoxy resin | 최낙삼 |
| 2015-01 | AE analysis of delamination crack propagation in carbon fiber-reinforced polymer materials | 최낙삼 |
| 2021-03 | Al6061-T6 평판 시편의 노치반경과 두께가 파괴 메커니즘에 미치는 영향 | 최낙삼 |
| 2003-10 | An analysis of the local buckling Collapse Behavior of an Aluminum Square Tube Concentrated Bending Moment loads | 최낙삼 |
| 2006-10 | Analysis of dominant frequencies of glass fiber/aluminum laminates during acoustic emission measurement | 최낙삼 |
| 2007-06 | Analysis of fracture process in single-edge-notched laminated composites based on the high amplitude acoustic emission events | 최낙삼 |
| 2007-06 | Analysis of fracture process in single-edge-notched laminated composites based on the high amplitude acoustic events | 최낙삼 |
| 2007-09 | Analysis of Interfacial Shear Strength of Fiber/Epoxy Composites by Microdroplet-Bond Test | 최낙삼 |
| 2007-04 | Analysis of Longitudinal Strains of Cross-ply Composite Laminates using A-EFPI Optical Fiber Sensor | 최낙삼 |
| 2004-04 | An analysis of the local buckling collapse behavior of an aluminum square tube under concentrated bending moment loads | 최낙삼 |
| 2001-06 | Analysis of the vibration damping of bonded beams with a single-lap-joint and partial dampers | 최낙삼 |
| 2001-07 | Analysis of the vibration damping of bonded beams with a single-lap-joint and partial dampers | 최낙삼 |
| 2007-10 | Application of Temperature-Compensating FBG Sensor to Strain Measurement | 최낙삼 |
| 2006-03 | Bending performance analysis of aluminum-composite hybrid tube beams | 최낙삼 |
| 2004-12 | Bending performance evaluation of reinforced aluminum square tube beams considering local buckling behavior | 최낙삼 |
| 2019-01 | Bending strength of CFRP laminated adhesive joints fabricated by vacuum-assisted resin transfer molding | 최낙삼 |
| 2008-05 | Characterization of the fracture process of notched glass fiber/aluminum hybrid laminates by acoustic emission | 최낙삼 |
| 2002-03 | Constraint Effect of Adherends on the Fracture of Adhesive Joint (1st report, Microscopic observation of the damage zone around a crack tip) | 최낙삼 |
| 2002-03 | Constraint Effect of Adherends on the Fracture of Adhesive Joint (1st report, Microscopic Observation of the Damage Zone around a Crack Tip) | 최낙삼 |
| 2009-10 | Cross-Link Density Measurement and Thermal Oxidative Degradation Analysis of a Carbon Black Compounded EPDM Rubber Hose | 최낙삼 |
| 2019-10 | Cyclic elastic modulus and low cycle fatigue life of woven-type GFRP coated aluminum plates | 최낙삼 |
| 2002-07 | Damage zone around crack tip and fracture toughness of rubber-modified epoxy resin under mixed-mode conditions | 최낙삼 |
| 2002-07 | Damage zone around crack tip and fracture toughness of rubber-modified epoxy resin under mixed-mode conditions | 최낙삼 |
| 2002-04 | Damage zone around tip of an interface crack between rubber-modified epoxy resin and aluminum | 최낙삼 |
| 2002-04 | Damage Zone around Tip of an Interface Crack between Rubber-Modified Epoxy Resin and Aluminum | 최낙삼 |
| 2003-03 | Detection of microfracture processes in composite laminates by thermo-acoustic emission | 최낙삼 |
| 2007-04 | Development of a precision indentation and scratching system with a tool force and displacement control module | 최낙삼 |
