2016-01 | Palm oil fuel ash as potential green micro-filler in polymer concrete | 이한승 |
2018-09 | Parametric analysis for cost-optimal renewable energy integration into residential buildings: Techno-economic model | 이한승 |
2023-02 | Performance and interaction mechanism of a new highly efficient benzimidazole-based epoxy resin for corrosion inhibition of carbon steel in HCl: A study based on experimental and first-principles DFTB simulations | 이한승 |
2015-11 | PERFORMANCE OF EPOXY RESIN AS SELF-HEALING AGENT | 이한승 |
2019-10 | Performance of Fly Ash Geopolymer Concrete Incorporating Bamboo Ash at Elevated Temperature | 이한승 |
2021-07 | pH-controlled synthesis of sustainable lauric acid/SiO2 phase change material for scalable thermal energy storage | 이한승 |
2021-07 | pH-controlled synthesis of sustainable lauric acid/SiO2 phase change material for scalable thermal energy storage. | 이한승 |
2015-11 | POFA 혼입률에 따른 시멘트 모르타르의 초기 물성에 관한 실험적 연구 | 이한승 |
2016-05 | POFA를 혼입한 시멘트 페이스트의 유동특성에 폴리카르본산계 감수제가 미치는 영향에 관한 실험적 연구 | 이한승 |
2021-06 | Polysulfone/Polyetherimide Ultrafiltration composite membranes constructed on a three-component Nylon-fiberglass-Nylon support for azo dyes removal: Experimental and molecular dynamics simulations | 이한승 |
2016-06 | Pore blocking characteristics of corrosion products formed on Aluminum coating produced by arc thermal metal spray process in 3.5 wt.% NaCl solution | 이한승 |
2018-11 | Pore structure refinement of cement paste incorporating nanosilica: Study with dual beam scanning electron microscopy/focused ion beam (SEM/FIB) | 이한승 |
2007-08 | Potential and Current Flow of Double Steel Bars in Concrete by 2-D BEM | 이한승 |
2017-05 | Prediction Model for the Carbonation of Post-Repair Materials in Carbonated RC Structures | 이한승 |
2021-02 | Prediction of compressive strength development for blended cement mortar considering fly ash fineness and replacement ratio | 이한승 |
2021-10 | Prediction of concrete mixing proportions using deep learning | 이한승 |
2007-11 | Prediction of Heat Evolution of OPC Blended With Silica Fume Using A Multi-Component Hydration Model | 이한승 |
2020-10 | Prediction of Service Life and Evaluation of Probabilistic Life-Cycle Cost for Surface-Repaired Carbonated Concrete | 이한승 |
2008-03 | Prediction of Temperature Distribution in High-Strength Concrete Using Hydration Model | 이한승 |
2008-09 | Prediction of the carbonation depth of concrete with a mortar finish | 이한승 |
2007-09 | Prediction of the elastic modulus of cement paste as a kinetic hydration model | 이한승 |
2017-01 | Prediction of Time-Dependent Chloride Diffusion Coefficients for Slag-Blended Concrete | 이한승 |
2021-04 | Preparation and Properties of Sustainable Concrete Using Activated Sludge of Industrial By-Products | 이한승 |
2015-11 | PROPERTIES OF MORTAR CONTAINING CERAMIC POWDER WASTE AS CEMENT REPLACEMENT | 이한승 |
2013-01 | Proposal for directions of Korea building code in the era of sustainability | 이한승 |
2016-09 | Protection of Reinforced Concrete Structures of Waste Water Treatment Reservoirs with Stainless Steel Coating Using Arc Thermal Spraying Technique in Acidified Water | 이한승 |
2019-02 | Quantitative evaluation of free CaO in electric furnace slag considering temperature and aging periods | 이한승 |
2017-01 | Quantitative evaluation of free CaO in electric furnace slag using the ethylene glycol method | 이한승 |
2019-05 | RC구조물의 Eddy Current 기반 철근부식 감지 센서에 관한 실험적 연구 | 이한승 |
2019-07 | Reliability and long-term evaluation of GO-MnO2 nano material as a newer corrosion monitoring sensor for reinforced concrete structures | 이한승 |