2010-05 | Fabrication and Ink-Jet Patterning of Copper Nanoparticles with Improved Dispersion Stability | 오제훈 |
2018-05 | Fabrication of fine metal patterns using an additive material extrusion process with a molten metal | 오제훈 |
2021-04 | Fabrication of hierarchically porous structured PDMS composites and their application as a flexible capacitive pressure sensor | 오제훈 |
2013-10 | Fabrication of high-resolution conductive lines by combining inkjet printing with soft lithography | 오제훈 |
2017-08 | Fabrication of highly sensitive capacitive pressure sensors with electrospun polymer nanofibers | 오제훈 |
2019-07 | Fabrication of highly sensitive capacitive pressure sensors with porous PDMS dielectric layer via microwave treatment | 오제훈 |
2017-08 | Fabrication of highly-sensitive capacitive pressure sensors with electrospun polymer nanofibers | 오제훈 |
2020-02 | Fabrication of triboelectric nanogenerators based on electrospun polyimide nanofibers membrane | 오제훈 |
2019-10 | Fatigue Behaviors of Resistance Spot Welds for 980 MPa Grade TRIP Steel | 오제훈 |
2018-02 | Formation and characterization of inkjet-printed nanosilver lines on plasma-treated glass substrates | 오제훈 |
2010-03 | Geometrical characterization of inkjet-printed conductive lines of nanosilver suspensions on a polymer substrate | 오제훈 |
2016-10 | High-resolution conductive patterns fabricated by inkjet printing and spin coating on wettability-controlled surfaces | 오제훈 |
2015-01 | High-resolution electrohydrodynamic printing of silver nanoparticle ink via commercial hypodermic needles | 오제훈 |
2023-04 | Highly flexible triboelectric nanogenerators with electrospun PVDF-TrFE nanofibers on MWCNTs/PDMS/AgNWs composite electrodes | 오제훈 |
2016-04 | Honeycomb-like nanofiber based triboelectric nanogenerator using self-assembled electrospun poly(vinylidene fluoride-co-trifluoroethylene) nanofibers | 오제훈 |
2023-01 | Influence of blood viscosity models and boundary conditions on the computation of hemodynamic parameters in cerebral aneurysms using computational fluid dynamics | 오제훈 |
2014-05 | Influence of bottom electrode configuration on crystalline structures of 6,13-bis(triisopropylsilylethynyl) pentacene films for all-inkjet-printed organic thin film transistors | 오제훈 |
2010-12 | Influence of C4F8 plasma treatment on size control of inkjet-printed dots on a flexible substrate | 오제훈 |
2015-06 | Influence of geometrical characteristics of sidewall-type multiple aneurysms on hemodynamic factors | 오제훈 |
2015-09 | Influence of Parent Artery Segmentation and Boundary Conditions on Hemodynamic Characteristics of Intracranial Aneurysms | 오제훈 |
2016-04 | Influence of Processing Conditions and Material Properties on Electrohydrodynamic Direct Patterning of a Polymer Solution | 오제훈 |
2016-04 | Influence of Processing Conditions and Material Properties on Electrohydrodynamic Direct Patterning of a Polymer Solution (vol 45, pg 2291, 2016) | 오제훈 |
2016-01 | Influence of substrate temperature and overlap condition on the evaporation behavior of inkjet-printed semiconductor layers in organic thin film transistors | 오제훈 |
2010-09 | Inkjet printing of conductive Ag lines and their electrical and mechanical characterization | 오제훈 |
2006-05 | Interfacial Strain Distribution of a Unidirectional Composite with Randomly Distributed Fibers under Transverse Loading | 오제훈 |
2013-07 | Investigation of the contact force distribution and dynamic behaviour of an automobile windshield wiper blade system | 오제훈 |
2022-10 | Investigation of the fastening behavior of self-tapping plastic joints with various supporting ribs | 오제훈 |
2018-06 | Microfluidic technology for cell manipulation | 오제훈 |
2007-07 | Nonlinear analysis of adhesively bonded tubular single-lap joints for composites in torsion | 오제훈 |
2019-07 | Optimization of Electrospinning Parameters for Electrospun Nanofiber-Based Triboelectric Nanogenerators | 오제훈 |