2015-12 | Effects of turbulence enhancement on combustion process using a double injection strategy in direct-injection spark-ignition (DISI) gasoline engines | 박성욱 |
2021-02 | Emission factor development for light-duty vehicles based on real-world emissions using emission map-based simulation | 박성욱 |
2014-11 | Engine Exhaust Particle Sizer를 통한 GDI 자동차에서 발생하는 나노미세입자 배출특성 분석 | 박성욱 |
2012-06 | Engine performance and exhaust emissions in stoichiometric combustion engines fuelled with dimethyl ether | 박성욱 |
2018-06 | Estimation of CO2 emissions from heavy-duty vehicles in Korea and potential for reduction based on scenario analysis | 박성욱 |
2017-05 | Estimation of CO2 reduction by parallel hard-type power hybridization for gasoline and diesel vehicles | 박성욱 |
2016-08 | Estimation of Total Transport CO2 Emissions Generated by Medium-and Heavy-Duty Vehicles (MHDVs) in a Sector of Korea | 박성욱 |
2011-07 | An experimental and modelling study of the combustion and emission characteristics for gasoline-diesel dual-fuel engines | 박성욱 |
2021-08 | Experimental investigation on the effect of injector hole number on engine performance and particle number emissions in a light-duty diesel engine | 박성욱 |
2022-06 | Experimental investigations on the spray structure and nozzle tip wetting using various fuels with an LPDI injector | 박성욱 |
2014-02 | Experimental study on spray break-up and atomization processes from GDI injector using high injection pressure up to 30 MPa | 박성욱 |
2016-08 | Experimental study on the icing characteristics of LPLi injectors under various injection conditions | 박성욱 |
2013-06 | Flame temperature distributions of biodiesel fuel in a single-cylinder diesel engine | 박성욱 |
2016-12 | Friction losses modeling of piston rings for various combustion pressures in diesel engine | 박성욱 |
2015-09 | Gaseous sphere 분사모델을 이용한 CNG 직분사 엔진 모델링 | 박성욱 |
2014-05 | GDI 가시화 엔진에서 분사전략이 연소특성에 미치는 영향 | 박성욱 |
2014-09 | GDI 연료분사 시스템에서 분사압력이 분무발달과정과 미립화에 미치는 영향 분석 | 박성욱 |
2014-09 | GDI/PFI 자동차 입자상 물질의 화학적 배출 특성 비교 분석 | 박성욱 |
2014-09 | GDI와 MPI 자동차의 미세입자 배출특성 비교 | 박성욱 |
2020-09 | Greenhouse Gas Emissions from Heavy-duty Natural Gas Vehicles in Korea | 박성욱 |
2022-09 | HES를 활용한 대형자동차의 CO2 배출량에 영향을 미치는 차량 변수의 민감도 분석 | 박성욱 |
2021-12 | Hole drilling angle이 가솔린 직접 분사식 인젝터의 내부 유동에 미치는 영향 | 박성욱 |
2020-09 | Influences of exhaust load and injection timing on particle number emissions in a gasoline direct injection engine | 박성욱 |
2021-07 | Investigation of the effects of EGR rate, injection strategy and nozzle specification on engine performances and emissions of a single cylinder heavy duty diesel engine using the two color method | 박성욱 |
2015-12 | LNG 엔진에서 당량비와 점화시기에 따른 엔진의 성능과 배기 특성에 관한 수치 해석적 연구 | 박성욱 |
2020-02 | Measurement and modeling of crank train friction in light-duty diesel engines | 박성욱 |
2022-10 | Mixture formation enhancement in a direct-injection spark-ignition engine using horizontal injection | 박성욱 |
2014-08 | Modeling and Parameterization of Fuel Economy in Heavy Duty Vehicles (HDVs) | 박성욱 |
2014-09 | Modeling effects of vehicle specifications on fuel economy based on engine fuel consumption map and vehicle dynamics | 박성욱 |
2018-03 | Modeling flash boiling breakup phenomena of fuel spray from multi-hole type direct-injection spark-ignition injector for various fuel components | 박성욱 |