| 2014-09 | 2단 분사가 가솔린 직분사 엔진에서 혼합기 형성에 미치는 영향에 관한 수치적 연구 | 박성욱 |
| 2011-04 | 4실린더 커먼레일 디젤엔진에서 바이오디젤 혼합연료와 EGR율에 따른 연소 및 배기특성 | 박성욱 |
| 2019-04 | Atomization characteristics of aerosol spray from hair spray vessel with various design parameters | 박성욱 |
| 2019-09 | CFD를 활용한 DOC-DPF 조합의 유동 균질도 분석 | 박성욱 |
| 2020-07 | Characteristics of flash boiling and its effects on spray behavior in gasoline direct injection injectors: A review | 박성욱 |
| 2021-11 | Characteristics of in-cylinder flow and mixture formation in a high-pressure spray-guided gasoline direct-injection optically accessible engine using PIV measurements and CFD | 박성욱 |
| 2013-09 | Characterization of the spray atomization process of a multi-hole gasoline direct injector based on measurements using a phase Doppler particle analyser | 박성욱 |
| 2011-05 | CI 엔진에서 공연비 변화가 바이오디젤의 연소 특성에 미치는 영향 | 박성욱 |
| 2014-05 | CNG 직접분사식 엔진을 위한 가스연료 분무해석연구 | 박성욱 |
| 2017-10 | CO2 emissions correction of light-duty vehicles based on an energy deviation analysis method | 박성욱 |
| 2012-07 | Combustion and emission characteristics of a gasoline-dimethyl ether dual-fuel engine | 박성욱 |
| 2015-12 | Combustion and Emission Characteristics of an LNG Engine for Heat Pumps | 박성욱 |
| 2011-11 | Combustion and emission characteristics of converging group-hole nozzle under lean engine operating conditions | 박성욱 |
| 2017-08 | Combustion characteristics of a methane engine with Air- and N-2-assisted direct injection | 박성욱 |
| 2017-08 | Combustion Characteristics of Methane Direct Injection Engine Under Various Injection Timings and Injection Pressures | 박성욱 |
| 2016-03 | Combustion performance, flame, and soot characteristics of gasoline-diesel pre-blended fuel in an optical compression-ignition engine | 박성욱 |
| 2016-07 | Combustion, noise, vibrations and spray characterization for Karanja biodiesel fuelled engine | 박성욱 |
| 2016-01 | Comparisons of Spray Characteristics Depending on the Nozzle Parameters in a Wafer Cleaning System Using a Twin-Fluid Nozzle | 박성욱 |
| 2015-12 | Comparisons of the nanoparticle emission characteristics between GDI and PFI vehicles | 박성욱 |
| 2017-03 | Comparisons of the volumetric efficiency and combustion characteristics between CNG-DI and CNG-PFI engines | 박성욱 |
| 2022-02 | Development of a cold-start emission model for diesel vehicles using an artificial neural network trained with real-world driving data | 박성욱 |
| 2016-08 | Development strategies to satisfy corporate average CO2 emission regulations of light duty vehicles (LDVs) in Korea | 박성욱 |
| 2012-05 | DME 연료에 첨가제를 혼합하였을 때의 연소 특성 및 배출가스 특성에 관한 연구 | 박성욱 |
| 2021-06 | Effect of engine compression ratio, injection timing, and exhaust gas recirculation on gaseous and particle number emissions in a light-duty diesel engine | 박성욱 |
| 2014-12 | Effect of fuel injection pressure and injection timing of Karanja biodiesel blends on fuel spray, engine performance, emissions and combustion characteristics | 박성욱 |
| 2014-04 | Effect of fuel injection pressure and injection timing on spray characteristics and particulate size-number distribution in a biodiesel fuelled common rail direct injection diesel engine | 박성욱 |
| 2015-11 | Effect of fuel injection strategy on Diesel Particulate Filter regeneration in single cylinder diesel engine | 박성욱 |
| 2015-06 | Effect of fuel temperature on heavy fuel oil spray characteristics in a common-rail fuel injection system for marine engines | 박성욱 |
| 2019-09 | Effect of hydraulic flow rate, injection timing, and exhaust gas recirculation on particulate and gaseous emissions in a light-duty diesel engine | 박성욱 |
| 2018-02 | Effect of injection pressure on soot formation/oxidation characteristics using a two-color photometric method in a compression-ignition engine fueled with biodiesel blend (B20) | 박성욱 |
