2018-08 | Carbonous metallic framework of multi-walled carbon Nanotubes/Bi2S3 nanorods as heterostructure composite films for efficient quasi-solid state DSSCs | 김학성 |
2019-09 | Complex structured polymer concrete sleeper for rolling noise reduction of high-speed train system | 김학성 |
2019-01 | Construction of dye-sensitized solar cells using wet chemical route synthesized MoSe2 counter electrode | 김학성 |
2018-12 | Construction of dye-sensitized solar cells using wet chemical route synthesized MoSe2 counter electrode | 김학성 |
2015-11 | Copper Nanoparticle/Multiwalled Carbon Nanotube Composite Films with High Electrical Conductivity and Fatigue Resistance Fabricated via Flash Light Sintering | 김학성 |
2011-02 | Cu(In,Ga)Se(2) Thin Film Preparation from a Cu(In,Ga) Metallic Alloy and Se Nanoparticles by an Intense Pulsed Light Technique | 김학성 |
2017-03 | CuS thin film grown using the one pot, solution-process method for dye-sensitized solar cell applications | 김학성 |
2018-07 | CuS/WS2 and CuS/MoS2 heterostructures for high performance counter electrodes in dye-sensitized solar cells | 김학성 |
2018-08 | Damage detection and self-healing of carbon fiber polypropylene (CFPP)/carbon nanotube (CNT) nano-composite via addressable conducting network | 김학성 |
2021-07 | Deep-learning based damage sensing of carbon fiber/polypropylene composite via addressable conducting network | 김학성 |
2016-05 | Dependence of polymer concrete vibration characteristics on internal pipe and damper embedment | 김학성 |
2020-03 | Design and manufacture of automotive composite front bumper assemble component considering interfacial bond characteristics between over-molded chopped glass fiber polypropylene and continuous glass fiber polypropylene composite | 김학성 |
2021-03 | Design and Manufacture of Automotive Hybrid Steel/Carbon Fiber Composite B-Pillar Component with High Crashworthiness | 김학성 |
2022-06 | Design and manufacture of thermoplastic carbon fiber/polyethylene terephthalate composites underbody shield to protect the lithium-ion batteries for electric mobility from ground impact | 김학성 |
2021-10 | Design of 3D printable prosthetic foot to implement nonlinear stiffness behavior of human toe joint based on finite element analysis | 김학성 |
2015-11 | Design optimization and manufacture of hybrid glass/carbon fiber reinforced composite bumper beam for automobile vehicle | 김학성 |
2014-03 | Design optimization of a carbon fiber reinforced composite automotive lower arm | 김학성 |
2019-04 | Determination of lithium diffusion coefficient and reaction mechanism into ultra-small nanocrystalline SnO2 particles | 김학성 |
2019-06 | Development of a via-hole connection process via intense pulsed light sintering with Cu micro/Ag nano-hybrid ink for a multi-layered flexible printed circuit board | 김학성 |
2018-11 | Development of a WS2/MoTe2 heterostructure as a counter electrode for the improved performance in dye-sensitized solar cells | 김학성 |
2019-08 | Development of FRACAS-CT module with FRAPCON4.0P01 for simulation of mechanical behaviors for accident-tolerant fuel cladding in a reactor | 김학성 |
2019-11 | Direct evaluation method to measure permittivity and conductivity of thin layers via wave approach in the THz region | 김학성 |
2017-03 | Effect of copper oxide shell thickness on flash light sintering of copper nanoparticle ink | 김학성 |
2021-05 | Effect of crystallinity on the mechanical behavior of carbon fiber reinforced polyethylene-terephthalate (CF/PET) composites considering temperature conditions | 김학성 |
2022-09 | Effect of cure shrinkage of epoxy molding compound on warpage behavior of semiconductor package | 김학성 |
2019-01 | Effect of plasma treatment on adhesion strength and moisture absorption characteristics between epoxy molding compound/silicon chip (EMC/chip) interface | 김학성 |
2014-11 | The effect of poly (N-vinylpyrrolidone) molecular weight on flash light sintering of copper nanopaste | 김학성 |
2017-07 | Effect of the cooling rate on the mechanical properties of glass fiber reinforced thermoplastic composites | 김학성 |
2017-06 | Efficiency enhancement in dye-sensitized solar cells using the shape/size-dependent plasmonic nanocomposite photoanodes incorporating silver nanoplates | 김학성 |
2016-05 | Electrical wire explosion process of copper/silver hybrid nano-particle ink and its sintering via flash white light to achieve high electrical conductivity | 김학성 |