| 2022-04 | Material extrusion-based three-dimensional printing of WC–Co alloy with a paste prepared by powder coating | 김영도 |
| 2012-02 | Mechanical properties of (Nd,Dy)-Fe-B magnets sintered via cyclic sintering | 김영도 |
| 2017-06 | Mechanical properties of Mo-Nb-Si-B quaternary alloy fabricated by powder metallurgical method | 김영도 |
| 2017-01 | Mechanical Properties of Mo-Si-B Alloys Fabricated by Using Core-Shell Powder with Dispersion of Yttria Nanoparticles | 김영도 |
| 2011-07 | Microstructural changes of aluminized Alloy 617 during high-temperature aging | 김영도 |
| 2016-06 | Microstructure and electrical properties of SiC dispersed molybdenum silicide composite | 김영도 |
| 2012-06 | Microstructure and mechanical properties of a Mg-Zn4.3Y0.7 alloy powder reinforced by quasi-crystalline particles | 김영도 |
| 2011-06 | Microstructure and mechanical properties of rapidly solidified Mg alloy powders compacted by magnetic pulsed compaction (MPC) method | 김영도 |
| 2015-11 | Microstructure control of Mo-Si-B alloy for formation of continuous alpha-Mo phase | 김영도 |
| 2011-02 | MoO3 분말의 수소환원을 통한 CIGS계 후면 전극용 Mo 박막제조 | 김영도 |
| 2015-01 | Nb-Si-B계에서 Nb+T2 공존 영역의 미세조직 특성 | 김영도 |
| 2015-07 | Nb-Si-B계에서 Nb+T2 공존 영역의 미세조직 특성 | 김영도 |
| 2019-08 | Nb-T2 합금의 파쇄분말을 사용한 Nb-Si-B계 합금의 제조 | 김영도 |
| 2013-02 | Nd-Fe-B permanent magnets fabricated by low temperature sintering process | 김영도 |
| 2015-02 | Nd-Fe-B 소결 자석의 보자력 향상 | 김영도 |
| 2019-04 | Ni5Y 합금상이 형성된 Ni계 산화물 분산강화 아토마이징 분말의 밀링 거동 분석 | 김영도 |
| 2015-07 | N타입 결정질 실리콘 웨이퍼 두께 및 알루미늄 페이스트 도포량 변화에 따른 Bowing 및 Al doped p+ layer 형성 분석 | 김영도 |
| 2015-01 | N타입 결정질 실리콘 웨이퍼 두께 및 알루미늄 페이스트 도포량 변화에따른 Bowing 및 Al doped p+ layer 형성 분석 | 김영도 |
| 2012-10 | On sinterability of Cu-coated W nanocomposite powder prepared by a hydrogen reduction of a high-energy ball-milled WO3-CuO mixture | 김영도 |
| 2014-03 | Optimization of the post-sintering annealing condition for the high Cu content Nd-Fe-B sintered magnet | 김영도 |
| 2020-10 | Oxidation Behavior of Pack-Cemented Refractory High-Entropy Alloy | 김영도 |
| 2016-07 | A Phenomenological Analysis on the Anisotropic Shrinkage of Nd-Fe-B Compacts During Sintering Process | 김영도 |
| 2013-05 | Phosphorus removal from wastewater by ionic exchange using a surface-modified Al alloy filter | 김영도 |
| 2017-09 | Photocatalytic Activity under UV/Visible Light Range of Nb-doped Titanate Nanostructures Synthesized with Nb Oxide | 김영도 |
| 2015-11 | Porous Mo-30 wt.% W alloys synthesized from camphene/MoO3-WO3 slurry by freeze drying and sintering process | 김영도 |
| 2014-11 | Powder Injection Molding of Translucent Alumina using Supercritical Fluid Debinding | 김영도 |
| 2021-08 | Refractory Metal Oxide-Doped Titanate Nanotubes: Synthesis and Photocatalytic Activity under UV/Visible Light Range | 김영도 |
| 2012-08 | Removal of bacterial pathogen from wastewater using Al filter with Ag-containing nanocomposite film by in situ dispersion involving polyol process | 김영도 |
| 2016-04 | Research Trend of Additive Manufacturing Technology − A=B+C+D+E, add Innovative Concept to Current Additive Manufacturing Technology: Four Conceptual Factors for Building Additive Manufacturing Technology − | 김영도 |
| 2017-01 | Sintering behavior of garnet-type Li7La3Zr2O12-Li3BO3 composite solid electrolytes for all-solid-state lithium batteries | 김영도 |
