2020-07 | GAS ATOMIZATION PARAMETRIC STUDY ON THE VIGA-CC BASED SYNTHESIS OF TITANIUM POWDER | 김영도 |
2015-05 | Grain refinement in heavy rare earth element-free sintered Nd-Fe-B magnets by addition of a small amount of molybdenum | 김영도 |
2017-12 | Heat Treatment Effect on the Behavior of Oxide Particles in Mechanically Alloyed Oxide Dispersion Strengthened Powders | 김영도 |
2011-11 | High coercive Nd-Fe-B magnets fabricated via two-step sintering | 김영도 |
2011-11 | High coercive Nd-Fe-B magnets fabricated via two-step sintering | 김영도 |
2016-01 | Homogeneous Dispersion of Carbon Nanotubes on Surface-Modified Bulk Titanium Substrates by Thermal Chemical Vapor Deposition | 김영도 |
2017-06 | IJRMHM special issue, selected papers in the session of "Refractory Metals and Hard Materials" for 14th ISNNM | 김영도 |
2019-01 | Improvement of high temperature mechanical properties of Ni-based oxide dispersion strengthened alloys by preferential formation of Y-Ti-O complex oxide | 김영도 |
2021-08 | Improving spreadability of hydrogenation–dehydrogenation Ti powder via surface treatment using silane-based compounds | 김영도 |
2017-07 | Influence of B and N on the microstructural characteristics and high-temperature strength of 9Cr-2W steel during an aging treatment | 김영도 |
2022-04 | Material extrusion-based three-dimensional printing of WC–Co alloy with a paste prepared by powder coating | 김영도 |
2012-02 | Mechanical properties of (Nd,Dy)-Fe-B magnets sintered via cyclic sintering | 김영도 |
2017-06 | Mechanical properties of Mo-Nb-Si-B quaternary alloy fabricated by powder metallurgical method | 김영도 |
2017-01 | Mechanical Properties of Mo-Si-B Alloys Fabricated by Using Core-Shell Powder with Dispersion of Yttria Nanoparticles | 김영도 |
2011-07 | Microstructural changes of aluminized Alloy 617 during high-temperature aging | 김영도 |
2016-06 | Microstructure and electrical properties of SiC dispersed molybdenum silicide composite | 김영도 |
2012-06 | Microstructure and mechanical properties of a Mg-Zn4.3Y0.7 alloy powder reinforced by quasi-crystalline particles | 김영도 |
2011-06 | Microstructure and mechanical properties of rapidly solidified Mg alloy powders compacted by magnetic pulsed compaction (MPC) method | 김영도 |
2015-11 | Microstructure control of Mo-Si-B alloy for formation of continuous alpha-Mo phase | 김영도 |
2011-02 | MoO3 분말의 수소환원을 통한 CIGS계 후면 전극용 Mo 박막제조 | 김영도 |
2015-01 | Nb-Si-B계에서 Nb+T2 공존 영역의 미세조직 특성 | 김영도 |
2015-07 | Nb-Si-B계에서 Nb+T2 공존 영역의 미세조직 특성 | 김영도 |
2019-08 | Nb-T2 합금의 파쇄분말을 사용한 Nb-Si-B계 합금의 제조 | 김영도 |
2013-02 | Nd-Fe-B permanent magnets fabricated by low temperature sintering process | 김영도 |
2015-02 | Nd-Fe-B 소결 자석의 보자력 향상 | 김영도 |
2019-04 | Ni5Y 합금상이 형성된 Ni계 산화물 분산강화 아토마이징 분말의 밀링 거동 분석 | 김영도 |
2015-07 | N타입 결정질 실리콘 웨이퍼 두께 및 알루미늄 페이스트 도포량 변화에 따른 Bowing 및 Al doped p+ layer 형성 분석 | 김영도 |
2015-01 | N타입 결정질 실리콘 웨이퍼 두께 및 알루미늄 페이스트 도포량 변화에따른 Bowing 및 Al doped p+ layer 형성 분석 | 김영도 |
2012-10 | On sinterability of Cu-coated W nanocomposite powder prepared by a hydrogen reduction of a high-energy ball-milled WO3-CuO mixture | 김영도 |
2014-03 | Optimization of the post-sintering annealing condition for the high Cu content Nd-Fe-B sintered magnet | 김영도 |