2011-06 | Behaviour of CaO coating of gas atomized Mg powders using mechanical milling process | 김영도 |
2021-02 | Characterization of microstructure and surface oxide of Ti1.2Fe hydrogen storage alloy | 김영도 |
2016-06 | CNTs 합성을 통해 향상된 비표면적을 갖는 Ti 다공체의 제조 | 김영도 |
2021-10 | Comparative study for microstructural characterisations and properties of Ti-Y powders produced by vacuum induction gas atomization cold crucible process | 김영도 |
2013-06 | Corrosion Behavior of Mg2Zn11 and MgZn2 Single Phases | 김영도 |
2014-03 | Dependence of magnetic, phase-transformation and microstructural characteristics on the Cu content of Nd-Fe-B sintered magnet | 김영도 |
2015-06 | DOUBLE STEP SINTERING BEHAVIOR OF 316L NANOPARTICLE DISPERSED MICRO-SPHERE POWDER | 김영도 |
2016-08 | Double-stage sintering behavior of a nickel nanoparticle dispersed micro powder | 김영도 |
2017-06 | Effect of ball-milling time on structural characteristics and densification behavior of W-Cu composite powder produced from WO3-CuO powder mixtures | 김영도 |
2021-05 | Effect of Boron on the Thermal Stability of the Precipitate Phase of FC92B and FC92N Steels During Aging and Creep | 김영도 |
2019-10 | Effect of Boron on the Thermal Stability of the Precipitate Phase of FC92B and FC92N Steels During Aging and Creep | 김영도 |
2012-11 | Effect of cyclic sintering process for NdFeB magnet on microstructure and magnetic properties | 김영도 |
2021-06 | Effect of Fe-Mn Solid Solution Precursor Addition on Modified AA 7075 | 김영도 |
2011-09 | Effect of Fe7W6 Phase (mu-phase) on Mechanical Properties of W-Ni-Fe Heavy Alloy | 김영도 |
2017-01 | Effect of heat treatment on corrosion resistance and adhesion property in Zn-Mg-Zn multi-layer coated steel prepared by PVD process | 김영도 |
2022-10 | Effect of high-energy ball milling on the microstructure and mechanical properties of Ni-based ODS alloys fabricated using gas-atomized powder | 김영도 |
2016-10 | Effect of Li3BO3 Additive on Densification and Ion Conductivity of Garnet-Type Li7La3Zr2O12 Solid Electrolytes of All-Solid-State Lithium-Ion Batteries | 김영도 |
2022-04 | Effect of phase transformation on the mechanical properties of the Co-Cr-Mo alloy fabricated by selective laser melting | 김영도 |
2019-06 | The effect of refractory (Zr, Hf) elements on the magnetocaloric property of Mn-based alloys | 김영도 |
2018-10 | Effect of synthesis methods on magnetocaloric properties of Co-based Heusler-type alloys | 김영도 |
2020-10 | Effect of the microstructure refinement by powder metallurgy on the oxidation behavior of Nb-6Mo-20Si-3Cr silicide-based alloy | 김영도 |
2022-01 | Effect of the W-W contiguity on conductivity of W-Cu composite using the Voronoi diagram | 김영도 |
2019-04 | Effect of titanium addition on mechanical properties of Mo-Si-B alloys | 김영도 |
2020-09 | EFFECTS OF ADDING NIOBIUM AND VANADIUM TO Fe-BASED OXIDE DISPERSION STRENGTHENED ALLOY | 김영도 |
2020-02 | Effects of Precipitates and Oxide Dispersion on the High-temperature Mechanical Properties of ODS Ni-Based Superalloys | 김영도 |
2014-06 | Effects of the two-step sintering process on the optical transmittance and mechanical strength of polycrystalline alumina ceramics | 김영도 |
2014-11 | The effects of ultrasonic nanocrystal surface modification (UNSM) on pack aluminizing for the fabrication of Pt-modified aluminide coatings at low temperatures | 김영도 |
2011-10 | Electrochromic Property of MoO3 Thin Films Deposited by Chemical Vapor Transport Synthesis | 김영도 |
2015-12 | Evaluation of the effect of B and N on the microstructure of 9Cr-2W steel during an aging treatment for SFR fuel cladding tubes | 김영도 |
2013-06 | Evaluation of the Mechanical Properties of Zn-Mg Alloys with Composition of Mg | 김영도 |